jepler ended the week on a high note, getting the motor of an Apple ][ floppy drive moving back and forth with CircuitPython! It's part of our quest to make Adafruit_Floppy work with non-PC floppy disk drives.
The simple code making this happen can be found in a GitHub gist: https://gist.github.com/jepler/16cdb13d8c3298c392d789772a56d177
For this step, +5 and +12V supplies are required, coming from an ATX power supply. The reading circuit requires an additional -12V supply just to spice things up. After that, we'll see what else is needed to start reading and writing flux in these drives.
Visit the Adafruit shop online - http://www.adafruit.com
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe