This weekend we got to play with a VFD tube. This ancient technology uses a gas tube to light up segments. In order to activate the fluorescence, we need to provide 20 to 30V DC on the segments. Not a lot of current, maybe 1mA each, but definitely needs to be a high voltage. For lower voltages, we could use a switched-cap converter. But for this, we'll need a proper booster! Let's find a small, low cost, simple, and available boost converter that can give us these bias voltages from 3 or 5V DC input.

See on Digi-Key at https://www.digikey.com/short/q4hvnttb

Visit the Adafruit shop online - http://www.adafruit.com

---

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/