When the computerized flat knitting machine is in use, there will be problems with the brush and needle lock. For these two faults, let's look at the specific solutions:

Computerized flat knitting machine-needle lock

Computerized flat knitting machines select needles by pins. The alignment of the pins is very important, which directly affects the operation of the machine. If the pins are not aligned, it will cause needle leakage. Generally, high-pin needles do not need to be raised. Needle must be raised for low stitches. For example, when weaving one plus one sesame pull collar, the needles are selected by the high and low stitches. If the stitches are not aligned, there will be missed stitches. .

Computerized flat knitting machine-brush problem

The brush problem is also very important in the leakage of the needle. The brush problem is mainly caused by the following aspects: the brush device is bad, the front and back are not correct, the brush is installed and the needle does not close the angle, the device is too high to resist the rebound of the needle tongue The brush does not open the tongue, it takes a long time, and the hair is seriously shed or bitten, and the quality of the brush is a problem.

(1) Defective brush device. The front and back are not correct, the brush must be aligned front and back, because when the machine head pulls the triangle movement back and forth, the knitting needle also moves, and the needles on both sides are carried out at the same time. The brush has a downward pressing tongue to make It can smoothly remove the ferrule, so there can be no front and back irregularities. If it is not correct, some needle tongues will not be pressed down to form a leaky needle. To solve this problem, the brush should be adjusted.

(2) The brush is installed reversely and does not close the angle with the needle. For this problem, it is the same as mentioned above, so the brush should be adjusted.

You can also learn more about the system by consulting a professional computer flat knitting machines manufacturer.