Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah.
Learn Guide: https://learn.adafruit.com/neopixel-menorah/
This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together.
The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders.
Code on GitHub https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/NeoPixel_Menorah/code.py
Parts
QT Py RP2040 https://www.adafruit.com/product/4900
NeoPixel Button PCB https://www.adafruit.com/product/4356
16mm Push Button https://www.adafruit.com/product/1503
3-pin Cables https://www.adafruit.com/product/4721
2-pin Cables https://www.adafruit.com/product/4720
M2.5 Hardware Kit https://www.adafruit.com/product/3299
USB-C Cable https://www.adafruit.com/product/4696
Visit the Adafruit shop online - http://www.adafruit.com
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe