View Details

Fall protection requirements for mobile elevated work platforms are often misunderstood, especially when it comes to boom lifts, scissor lifts, manufacturer guidance, and jobsite-specific rules. In this episode of Safety Factor, Ben Hengst sits down with a panel of fall protection specialists to break down what workers, supervisors, and safety leaders need to know before stepping into a lift.

The discussion covers when fall protection is required in a boom lift versus a scissor lift, why ejection is one of the biggest hazards in elevated platforms, and how OSHA requirements interact with manufacturer instructions, company policy, and site rules. The panel also explains the difference between fall restraint and fall arrest, where to tie off inside a lift, and why using the wrong equipment can create serious risk.

If your team uses boom lifts, scissor lifts, or other aerial equipment, this episode offers practical guidance on selecting PPE, inspecting equipment before use, training workers properly, and avoiding the complacency that often leads to incidents at height.

"I think the biggest issue with any type of fall protection, especially when you're tying off into lifts, it's just complacency... they've been in a lift every day, or they've done it hundreds of times and nothing's ever happened any other time. So they're not taking this serious." Dan Montchal, Project Manager and Horizontal Lifeline Specialist, HySafe

Episode Highlights

• Why boom and scissor lifts have different fall protection considerations
• Ejection vs falling out of a boom lift
• Fall restraint vs. fall arrest — what each one does and when they matter
• Common tie-off mistakes
• Why training, inspections, and JSAs, are critical before working at height

This episode is essential listening for:

• Safety managers and EHS leaders
• Workers who operate boom lifts or scissor lifts
• Supervisors responsible for work at height
• Contractors reviewing lift safety requirements and training
• Anyone building or improving a fall protection program

Guests:

• Hillari Frost, Fall Protection Division Manager, Mazzella
• Corey Crawford, Fall Protection Specialist, Mazzella
• Becky Danielson, Training Director, Safewaze
• Dan Montchal, Project Manager and Horizontal Lifeline Specialist, HySafe

Free Downloads:

• Job Safety Analysis and Working at Height Risk Assessment Bundle
• Fall Safety 101 Infographic Poster
• Top 10 Safety Tips for Working at Height
• Top 5 Fall Protection Hazards on the Job Site
• Fall Protection Harness Inspection Field Reference
• Hierarchy of Fall Protection

View Details

What safety features should be built into your next crane or your lifting equipment? Which ones tend to get cut before the order is placed?

In this episode of Safety Factor, crane experts share what happens when budget decisions override safety intentions. From no-touch rigging tools to laser-marked danger zones, they walk through the safety innovations available today and explore the extra costs associated.

You’ll hear about the most common injury patterns in steel operations, the push-pull between production and safety, and how small investments now can prevent major incidents later.

"Everybody has caviar dreams until they find out how much it costs, right? So yes, they want to make them safe. Yes, they want to make them reliable, right? ... 'Yes, I want the Cadillac.' And then you give 'em the price and they say, 'Oh, well, what can we do to get it, you know, half price?'"

Episode Highlights:

• Why crane safety features get cut during procurement - A real look at where cost pressures show up—and what it means for operators
• No-touch systems and radio control systems - What they do, how they help, and the % price bump to expect
• Crane safety vs. production pressure - Why “just train them better” isn't a full strategy—and what to do instead
• How to use incident data to justify safety upgrades - Learn how near-miss trends can support your CapEx proposal
• The hidden cost of designing for price, not safety - When procurement wins the spec battle, who pays the price later?

Whether you're specifying cranes, selecting safety systems, or building a CapEx case, this episode offers grounded advice on how to prioritize safety, even when budgets tighten.

Guests:

• Jim Warren, Director of Steel Segment, Mazzella
• Chris Ross, Key Account Manager, Mazzella
• Lance White, Director of Sales Specialists, Mazzella

FREE DOWNLOADS:

• Overhead Cranes E-Book: Overhead Cranes From Top To Bottom
• 10 Things to Consider When Selecting an Overhead Crane for Your Business Checklist
• Bridge Crane Quote Comparison Tool
• Overhead Crane and Hoist Service E-Book: A Guide to Upgrades and Modernizations
• Overhead Cranes & Built-Up Hoists Brochure
• No-Touch Electrode Handling Systems Brochure

View Details

When it comes to overhead cranes, the real cost isn’t always upfront. In this episode of Safety Factor, crane industry veterans share the most common buying mistakes that lead to catastrophic failures, expensive service calls, and constant downtime, and how to avoid them from the start.

From mismatched duty cycles to proprietary parts and short-sighted procurement strategies, this episode unpacks the traps that cost operations hundreds of thousands—if not millions—over time.

You’ll hear exactly what to avoid when buying a crane, so you don’t end up with years of breakdowns, ballooning costs, and downtime you can’t afford.

"You've got cranes that are still in service that have been up for 40 years, and they're still serviceable, they're still solid, good cranes, and those cranes were sold right. You've got other cranes that were sold six months ago, and they're wore out already." - Kevin Brewer, Director of Service, Mazzella

Episode Highlights:

• Real-life crane failures and what caused them
• Why specs—not price tags—should guide your next crane purchase
• Understanding duty cycle and what it means for your uptime
• How to compare crane quotes the right way
• What makes a crane easier and cheaper to service long-term
• How to explain crane needs to higher-ups or procurement

Whether you're sourcing a new crane or stuck maintaining one that’s underperforming, this episode is packed with honest insights, technical expertise, and hard-earned lessons.

This Episode Is Essential Listening For:

• Operations managers in steel and mill environments
• Procurement teams evaluating crane proposals
• Engineers and maintenance leaders
• Anyone responsible for uptime in a facility with overhead cranes

Guests:

• Jim Warren, Director of Steel Segment, Mazzella
• Tim Gaydos, Crane Specialist, Mazzella
• Kevin Brewer, Director of Service, Mazzella

FREE Downloads:

• Overhead Cranes E-Book: Overhead Cranes From Top To Bottom
• 10 Things to Consider When Selecting an Overhead Crane for Your Business Checklist
• Bridge Crane Quote Comparison Tool
• Overhead Crane and Hoist Service E-Book: A Guide to Upgrades and Modernizations

View Details

In a special episode of Safety Factor, a panel of women leaders in the lifting industry share their diverse journeys and experiences. Discussing their unique backgrounds, from engineering to finance, and how they navigated their careers in a traditionally male-dominated field. They emphasize the importance of safety, innovation, and community within the industry, highlighting the familial atmosphere that keeps them engaged. Addressing the challenges of attracting new talent and the exciting intersection of digital and practical training. Ultimately, they celebrate their roles in making the industry safer and more inclusive.

View Details

Join us for the second episode in Mazzella Companies’ 70-year celebration series, as we delve into the journey of the third generation of Mazzella family leadership and their vision for the future of rigging, metal roofing, and rollforming equipment. In this episode of Safety Factor, we’re joined by Tony, Matt, and Adam Mazzella, who reflect on their family’s legacy, the core values they’ve inherited, and the exciting growth opportunities ahead for Mazzella Companies.

"To me, it’s not just the money side of it. It is, you know, how can we accentuate these core values even to another level, even to another level? And ultimately for us to be successful, that's what we have to do. It can’t just be here. It needs to be something that’s scalable. It needs to be something that we take everywhere,”- Adam Mazzella, President of Metals Division, Mazzella Companies

In this episode, listeners will hear:

• Stories of Mazzella’s growth into a national industry leader in lifting, rigging, metal coil supply, and Portable rollforming machinery
• The challenges and achievements of the third generation, including expansion into crane manufacturing and metals
• Reflections on family legacy, work ethic, and the future
• Insights into how the Mazzella team honors their foundational values while pushing forward with new technology and industry expertise

This episode offers a unique behind-the-scenes look at three generations of Mazzella leadership. Hear candid reflections on the family dynamics, competitive spirit, and work ethic that have propelled the company forward. As Tony Mazzella shares, "They both have the grit to get it done."

If you're a professional in rigging, lifting, or metal roofing, this episode offers a compelling look at the evolution of a family business and its impact on the industries it serves. Discover how Mazzella’s family legacy continues to inspire innovation, strengthen partnerships, and drive sustainable growth across the rigging and metal sectors.

Guests:

• Tony Mazzella, CEO of Mazzella Companies
• Adam Mazzella, President of Sheffield Metals and New Tech Machinery
• Matt Mazzella, President of Mazzella

Background Reading & Watching:

• Mazzella Companies Celebrates 70th Anniversary
• Matt Mazzella and Adam Mazzella Named Presidents of Mazzella Companies
• 100th Birthday Tribute for Our Founder, Jim Mazzella, Sr.
• Complete Lifting & Metals Solutions: Mazzella Companies' Capabilities

FREE Downloads:

• Mazzella Capabilities Brochure (English)
• Mazzella Capabilities Brochure (Spanish)
• Lifting & Rigging Learning Center Resources Guide
• Sheffield Metals D7 Product Brochure
• NTM Product Catalog

Related Podcasts:

• Rigging Through the Ages: Mazzella’s 70-Year Journey as a Rigging Industry Leader
• Unveiling AWRF’s Vision for the Future of Rigging Industry Safety and Standards
• Exploring Career Advancement in the Lifting Industry Through Industrial Training on Global Lifting Awareness Day
• Adapting to Wind Energy: The Evolution of the Lifting Industry
• Raising the Bar: Enhancing Crane Lift Safety with Technology

Contact Mazzella:

• Schedule Remote or In-Person Rigging and Crane Training
• Contact Mazzella's Rigging Division
• Contact Sheffield Metals
• Contact New Tech Machinery

Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

Join us for a special episode of "Safety Factor" as we celebrate Mazzella Companies' 70-year journey in the rigging industry. This episode is a tribute to the legacy of innovation, dedication, and excellence that has defined Mazzella's history as a family-owned rigging industry leader.

Hear from CEO Tony Mazzella and Co-owner Jim Mazzella as they share intimate details about the company's founding, key milestones, and the core values that have guided its success over seven decades.

"My dad's mentality of you got to be a lifelong learner. You got to stay with the times. You're either getting better, you're either moving forward or backward, there's no such thing as standing still. That's almost a mantra inside our company. And then the idea of humble, he was a very humble guy. He was hungry, he had a good work ethic, he was smart. And I mean that in his relationship with people. His, the people work for him, the vendors, the customers, that mentality of team. So all those things that we put on the wall today, in my mind, were directly from him. And that's what we grew up around our whole life, and deviating from them, I don't think we're here today." - Tony Mazzella, CEO of Mazzella Companies

Tony and Jim share captivating stories about their father, the founder, Jim Mazzella, Sr., and his groundbreaking contributions to rigging technology. From the invention of the 7-part™ Wire Rope Sling to the development of Mazzella's steel mill program, Mazzella has been at the forefront of industry advancements.

Listeners will discover:

• The humble beginnings and relentless perseverance that laid the groundwork for Mazzella's lasting success
• Key innovations, including the invention of the 7-part™ Wire Rope Sling, that have shaped the rigging industry
• Pivotal moments in Mazzella's growth, such as securing major steel mill accounts and expanding into new locations
• The core values that have sustained the company through changing times and guided it to becoming a rigging industry leader
• Insights into the next generation of Mazzella leadership and the company's vision for the future

This podcast episode is a must-listen for anyone working in the rigging industry. Mazzella's remarkable story provides invaluable insights into the evolution of the rigging business, from pioneering sling designs to navigating industry-shaping events like recessions and technological advancements. This episode offers a unique behind the scenes look at the history and future of the lifting and rigging industry.

Guests:

• Tony Mazzella, CEO of Mazzella Companies
• Jim Mazzella, Co-Owner of Mazzella Companies

Background Reading & Watching:

• Mazzella Companies Celebrates 70th Anniversary
• Mazzella Lifting Technologies lost a long-time employee on July 20, 2015—James “Jimmy the Jet” Murray. A Tribute to James “Jimmy the Jet” Murray—the World’s Fastest Wire Rope Splicer!
• Matt Mazzella and Adam Mazzella Named Presidents of Mazzella Companies
• 100th Birthday Tribute for Our Founder, Jim Mazzella, Sr.
• Complete Lifting & Metals Solutions: Mazzella Companies' Capabilities
• Learn more about these real-world solutions and results! Mazzella Case Studies

FREE Downloads:

• Mazzella Capabilities Brochure (English)
• Mazzella Capabilities Brochure (Spanish)
• Lifting & Rigging Learning Center Resources Guide
• Mazzella 7-Part™ Wire Rope Slings

Related Podcasts:

• Unveiling AWRF’s Vision for the Future of Rigging Industry Safety and Standards
• Steel’s Sprint From the Safety Stone Age
• Raising the Bar: Enhancing Crane Lift Safety with Technology
• How Virtual Reality and Augmented Reality Are Revolutionizing Industrial Training

Contact Mazzella:

• Schedule Remote or In-Person Rigging and Crane Training
• Contact Mazzella's Rigging Division

Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

Dive into the world of industrial lifting and rigging as we celebrate Global Lifting Awareness Day. We discuss how the industry has evolved as well as the importance of making your voice heard on Global Lifting Awareness Day. Then, this episode of Safety Factor delves into career advancement opportunities through specialized industrial training programs and features insights from industry experts.

"This industry is going nowhere, Ben. I mean, the more you know, the more you grow, right? So the sky is really the limit for the lifelong learner, and the more education they get, the higher they can go in this industry." - JT Farley, Mazzella Customer Trainer

Episode Highlights:

• Global Lifting Awareness Day Recap: Ross Moloney revisits the highlights of last year's event and outlines the goals for 2024, emphasizing the importance of respecting quality products, maintaining rigorous inspection standards, and valuing industry expertise.
• Career Advancement through Industrial Training
• Key skills and certifications crucial for career growth
• Industrial training programs offered by Mazzella and ITI
• How to leverage training opportunities for career advancement
• The importance of documented competency and qualifications
• Expert advice for those new to the industry

Whether you're operating cranes, rigging loads, or managing safety protocols, from newcomers to seasoned professionals, this episode offers a comprehensive look at how industrial training can propel your career in the lifting industry.

This episode is essential listening for:

• Newcomers to the lifting and rigging industry
• Experienced professionals seeking career advancement
• Safety managers and trainers
• Company owners and executives in industrial sectors

GLAD2024

Guests:

• Ross Moloney, CEO at LEEA
• Amanda Long, Vice President of Sales at ITI
• JT Farley, Mazzella Customer Trainer

Background Reading:

• How Does Global Lifting Awareness Day Promote the Lifting Industry?
• How Is Technology Changing the Lifting and Rigging Industry?
• OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?
• How Is ITI Incorporating Technology Into Crane Operator Training?
• Why Pay for Lifting and Rigging Training When You Can Get it for Free?
• How to Get More Out of Your Rigging Training and Lift Training Courses
• Crane Operator Training: Who’s Responsible for Training Your Employees?
• Ride Along with Al Abel – Day in the Life of a Lifting & Rigging Trainer
• OSHA Definitions of Competent, Qualified, Designated, & Certified Persons
• OSHA, ASME, and ANSI: What They Do and How They’re Different

FREE Downloads:

• Lifting and Rigging Best Practices Infographic
• Mazzella / ITI Training Solutions Brochure
• OSHA Personnel Designations [Guide]
• Calculating Load Weight Pocket [Guide]
• Hierarchy of Fall Protection [Infographic]

Contact Mazzella:

• Schedule Remote or In-Person Rigging and Crane Training
• Contact Mazzella's Rigging Division

Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

The rigging industry has come a long way in prioritizing worker safety, moving from an era where fatalities were expected to a modern approach focused on rigorous standards and continuous improvement in rigging industry safety and standards. As AWRF members Tim Klein, Emily Wagner, Jeff Ferchen, and Terry Driscoll reveal, the association plays a crucial role in shaping the future of the industry through its technical committees, recommended practices and guidelines, and collaboration with other organizations.

"We're taking all that information and collecting it in the Recommended Practices and Guidelines. Whether it be the proper proof testing of a chain sling or a wire rope sling or a lever hoist, Swager Safety Guide, we have these documents that we've collected all of this information showing the proper way to do it, and we're continually updating those" - Tim Klein, PE, Senior Director – Structures at WireCo

In this episode, you'll gain insights into AWRF's vision for the future of rigging industry safety and standards, including:

• Emerging safety trends and the role of personal competency
• The impact of new technologies like load monitoring tools
• Strategies for training the next generation of lifting professionals
• The importance of industry consolidation and global economics
• Opportunities to get involved and contribute to AWRF's initiatives

This episode of Safety Factor is a must-listen for professionals across the rigging industry spectrum — from veterans to newcomers and from safety managers to CEOs. Whether you're a rigging professional, safety manager, or industry stakeholder, this episode offers a comprehensive look at AWRF's efforts to drive continuous improvement in rigging industry safety and standards.

Guests:

• Terry Driscoll, Regional Sales Manager at Mazzella
• Jeff Ferchen, Director, Business Development at The Caldwell Group, Inc.
• Emily Wagner, Co-Owner at JAGwire Management
• Tim Klein, PE, Senior Director – Structures at WireCo

Background Reading:

• What Technological Advancements Have Made Lifting and Rigging Safer? How Is Technology Changing the Lifting and Rigging Industry?
• We are counting down our list of the top ten lifting technologies that are advancing the lifting industry. The Top Ten Lifting Technologies Advancing the Industry
• What Is a Signalperson Responsible for on a Jobsite? What Are a Signalperson’s Responsibilities, According to ASME B30.2?
• What Must Be Done During the Operation of a Tower Crane? What Are Tower Crane Personnel Responsibilities, per ASME B30.3?
• What Does a Crane Operator Need to Do Before, During, and After a Lift? What Are an Overhead Crane Operator’s Responsibilities, According to ASME B30.2?
• How Important Is Knowing the Center-of-Gravity of a Load? How Do You Safely Lift Off-Center Loads?
• How To Perform a Lifting Clamp Inspection to ASME B30.20 Standards
• What Is the BlokCam, and How Does It Make Lifts Safer?
• What devices can I use to properly secure loads for transport? What Is Load Securement, and What Standards Govern Safe Transport?
• Why Is Mazzella’s Process for Ordering Crane Ropes so Comprehensive?
• As a rigger or end-user of wire rope, it's important to understand the types of end terminations that can be used at the end of a length of wire rope. Wire Rope End Terminations: Sockets, Wire Rope Clips, and Splices
• A Tribute to James “Jimmy the Jet” Murray—the World’s Fastest Wire Rope Splicer!

FREE Downloads:

• Rigging Gear Inspection Field Reference
• ASME B30 Markings and Identification Guide
• Lifting & Rigging Inspection Frequencies & Records Guide
• Sling Inspections E-Book: A Guide to Inspections & Applicable Standards
• Overhead Crane / Hoist Operator Daily Inspection Checklist
• Disposal of Damaged Rigging Gear Guide
• Lifting and Rigging Best Practices Infographic
• Lifting and Rigging Site Assessment Guide]

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Mazzella's Rigging Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

Consistent rigging inspections identify damaged equipment before failures occur, preventing accidents and injuries. Not only do they prevent accidents and injuries, but documented inspections are required for OSHA compliance and can help companies avoid costly fines.

"When you look at the failure criteria for any type of item you're looking at, alloy chain slings, it's obviously written, and it's objective. It tells you a gouge, it tells you a weld burn, it tells you heat damage. But when you start to look at them, it becomes subjective to the person, to the individual actually looking at it. What is a gouge to me, and what is a gouge to you? And how much of a gouge are you going to allow in service? And how much of a gouge am I going to allow?"

In this episode of Safety Factor, Inspection Managers Tom Horner and Bryan Holmgren of Mazzella explore the critical role of rigging inspections.

• Hear alarming stories of dangerous rigging found during inspections
• Learn what rigging inspection regulations and standards require
• Understand what to look for in an inspection company’s qualifications
• Discover common hurdles to starting an inspection program
• Get advice on how to build a compliant and defendable inspection process

For EHS leaders, safety managers, maintenance managers, and operations leaders, this episode delivers vital insights on establishing documented rigging inspection programs to ensure safety and regulatory compliance.

Guests:

• Tom Horner, Corporate Rigging Inspection Manager-Rigging Inspection Services at Mazzella
• Bryan Holmgren, Regional Rigging Inspection Manager-Rigging Inspection Services at Mazzella

Background Reading:

• OSHA Inspection Series: How Important Are Rigging Inspections?
• At least one periodic inspection of your rigging equipment is required every 12 months (at a minimum) per OSHA and ASME. Learn more about inspection frequencies and the factors that can affect the cost of a periodic rigging inspection. How Much Does an OSHA/ASME Compliant Rigging Inspection Cost?
• These four simple questions can help make your rigging inspection run as smooth as possible and avoid surprises and extra charges during the course of a third-party rigging inspection. How to Plan and Prepare for a Third-Party Rigging Gear Inspection
• How do I know if I received a good rigging inspection that keeps me in compliance with ASME standards? What Signs Will Show if My Rigging Inspection was ASME-Compliant?
• What to look for when selecting a third-party company to inspect your wire rope, chain slings, roundslings, and rigging hardware. How to Choose a Rigging Inspection Company for OSHA Compliance
• Sling Inspections, an online Lifting U™ course, is designed for anyone looking to learn how to inspect their lifting slings to OSHA & ASME standards. Mazzella Companies Launches Online Sling Inspection Course
• Depending on the severity of the operating environment and frequency of use, your business may choose to integrate a more thorough and more frequent rigging inspection program. How Often Must Slings and Other Rigging Equipment Be Inspected?
• Identifying and removing unsafe lifting and rigging equipment is critical to a safe work environment and avoiding accidents and costly fines. Do You Know What Damaged and Unsafe Rigging Equipment Looks Like?
• No matter what the production process is, what’s being moved through the facility, or what type of rigging practices are being used, these are the most common problems we discover during the course of a rigging inspection. The 6 Most Common Problems Found During a Rigging Gear Inspection

FREE Downloads:

• Sling Inspections E-Book: A Guide to Inspections & Applicable Standards
• Rigging Gear Inspection Field Reference
• Lifting & Rigging Inspection Frequencies & Records Guide
• Harness Inspection Checklist
• Mazzella Cable SRL Field Inspection Reference Guide
• Synthetic SRL / Lanyard Inspection Checklist

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Mazzella's Rigging Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

As steel mills utilize multiple cranes on varying elevations, collisions and injuries remain an ongoing concern. New technologies aim to address these challenges.

"The steel industry has predominantly been a little bit behind the technology curve, and really, we should be leading the curve. Because this is one of the most expensive downtime-related industries."

In this episode, Laser-View Technologies president Steven Lubeck joins Mazzella crane experts Kenny Wright and Mark Shubel to explore crane safety within the steel industry.

• Hear how multi-elevation cranes are used in steel mills and the associated safety risks
• Learn about “no-fly zones” and other technologies to prevent collisions
• Discover how these technologies also improve productivity and efficiency
• Get perspectives on balancing safety needs with cost considerations
• Find out where they see the future of crane safety technology headed

For steel mill safety managers, maintenance managers, and steelmaking leaders, this Safety Factor episode delivers critical insights on emerging crane technologies to enhance safety, prevent downtime, and boost productivity.

Guests:

• Steven Lubeck, President of Laser-View Technologies
• Kenny Wright, Vice President of Process Cranes and Modernizations at Mazzella
• Mark Shubel, Director of Crane Service Technical Training & Applications at Mazzella

Background Reading:

• How Can Collision Avoidance Systems Improve Jobsite Safety? How Do Collision Avoidance Systems Make Overhead Lifts Safer?
• With modern technologies becoming more readily available and more affordable, the safety features available for overhead crane systems have never been better. Overhead Crane Safety Systems: Modern Features and Technologies
• Many employers don’t understand who is responsible for providing training for employees who operate overhead crane equipment. Crane Operator Training: Who’s Responsible for Training Your Employees?
• How Does the No Touch® Electrode Handling System Make Steel Mills Safer?
• Keep Workers Safe With Elebia Automatic Hooks for Steel Mill Rigging
• What Technological Advancements Have Made Lifting and Rigging Safer? How Is Technology Changing the Lifting and Rigging Industry?

FREE Downloads:

• Overhead Crane & Hoist Service E-Book: A Guide to Upgrades & Modernization
• Overhead Cranes E-Book: Overhead Cranes From Top To Bottom
• Lifting & Rigging Site Assessment Guide
• Lifting & Rigging Best Practices Infographic
• Overhead Crane / Hoist Operator Daily Inspection Checklist

Related Podcasts:

• Steel’s Sprint From the Safety Stone Age
• How To Make Your Overhead Crane Safer
• How To Make Your Overhead Crane More Efficient
• Overhead Cranes 2.0: How Automation is Revolutionizing Crane Safety
• How Virtual Reality and Augmented Reality Are Revolutionizing Industrial Training

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Overhead Crane Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

Major changes in the latest version of the ASME B30.2 Overhead and Gantry Cranes safety standard took effect in 2023, bringing new requirements and guidance.

In this episode, Tad Dunville and Bobby Hamilton from the ASME B30.2 Overhead and Gantry Cranes committee help interpret key updates for owners and operators.

"So this guy was calling me 'cause he had just purchased the new 2022 Standard. And he's like, "Man, trolley rail sweeps, it says, 'shall.' " And he is like, "Do you realize I've got dozens and dozens of cranes in here that don't have trolley rail sweeps? And now I'm seeing the standard and it says they shall be included. So does that mean I got to put these rail sweeps in?"

• Hear a breakdown of significant new rules around rail sweeps, signal persons, medical evaluations, and more
• Get their advice on smart steps when changes seem challenging or expensive to implement
• Learn why staying up-to-date on standards reduces liability and improves productivity
• Discover resources like crane OEMs and service companies available to help interpret gray areas

If you operate overhead cranes, this Safety Factor episode delivers critical insights on the new ASME B30.2 Overhead and Gantry Cranes rules to ensure safety and regulatory compliance.

Guests:

• Tad Dunville, AIST Southwest Chapter Vice Chairman and ASME B30.2 Overhead and Gantry Cranes Standards Committee Member
• Bobby Hamilton, Regional Service Manager at Mazzella

Background Reading:

• ASME B30.2-2022: Updates & Revisions to ASME B30.2 Overhead & Gantry Cranes Standard
• What Does a Crane Operator Need to Do Before, During, and After a Lift? What Are an Overhead Crane Operator’s Responsibilities, According to ASME B30.2?
• What Is a Signalperson Responsible for on a Jobsite? What Are a Signalperson’s Responsibilities, According to ASME B30.2?
• What Is Needed for the Reassembling of Overhead Cranes? What Are the Requirements Needed to Reassemble Overhead Cranes?
• What Are the Requirements For an OSHA-Compliant Overhead Crane Inspection?
• What Goes Into the Process of Quoting a New Overhead Crane? 7 Building Considerations When Designing an Overhead Crane

FREE Downloads

• Overhead Crane & Hoist Service E-Book: A Guide to Upgrades & Modernization
• Overhead Cranes E-Book: Overhead Cranes From Top To Bottom
• Bridge Crane Quote Comparison Tool
• 10 Things to Consider When Selecting an Overhead Crane for Your Business Checklist

Related Podcasts:

• Overhead Cranes 2.0: How Automation is Revolutionizing Crane Safety
• How Virtual Reality and Augmented Reality Are Revolutionizing Industrial Training
• How Do Collision Avoidance Systems Make Overhead Lifts Safer?
• How To Make Your Overhead Crane More Efficient

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Overhead Crane Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

The automation revolution has arrived for overhead cranes, transforming safety and efficiency in groundbreaking ways.

In this episode of Safety Factor, industry veterans Kenny Wright and Tad Dunville talk about how automation is modernizing cranes.

"When you have people with a two-page or three-page proposal for automating a crane that says automate the crane. Someone with a 300-page one that specifies where the rail cars are and how dynamic the rail car positioning can be. That's not apples to apples at that point."

• Hear insights on different automation levels, sway control, laser and radar positioning, and using AI for smarter cranes
• Get their tips for companies buying automated cranes to avoid pitfalls and optimize safety
• Discover how automation can remove workers from harm's way and stop operations when people enter hazardous areas
• The guests discuss work underway to update outdated crane regulations for the automation age

If you want the inside scoop on the automation revolution in overhead cranes, don’t miss this eye-opening Safety Factor episode!

Guests:

• Tad Dunville, AIST Southwest Chapter Vice Chairman and ASME B30.2 Overhead and Gantry Cranes Standards Committee Member
• Kenny Wright, Vice President of Process Cranes and Modernizations at Mazzella

Background Reading:

• The amount of engineering and fabrication to meet your specifications can determine whether a modular system or an engineered or process crane system is right for you. Overhead Cranes: Modular Cranes vs. Engineered Process Cranes
• With modern technologies becoming more readily available and more affordable, the safety features available for overhead crane systems have never been better. Overhead Crane Safety Systems: Modern Features and Technologies
• Engineering advancements and modern technologies can extend the life of an overhead crane that no longer works efficiently, or doesn’t meet your current production requirements. 6 Signs It’s Time to Upgrade and Modernize Your Overhead Crane
• Price shouldn't be the only factor when selecting an overhead crane company to partner with. Read on to get a comprehensive understanding of an overhead crane quote and what criteria you should use to compare multiple quotes. How to Gather and Compare Overhead Crane Quotes
• What Goes Into the Process of Quoting a New Overhead Crane? 7 Building Considerations When Designing an Overhead Crane
• ASME B30.2-2022: Updates & Revisions to ASME B30.2 Overhead & Gantry Cranes Standard

FREE Downloads

• Overhead Crane & Hoist Service E-Book: A Guide to Upgrades & Modernization
• Overhead Cranes E-Book: Overhead Cranes From Top To Bottom
• Bridge Crane Quote Comparison Tool
• 10 Things to Consider When Selecting an Overhead Crane for Your Business Checklist

Related Podcasts:

• How Do Collision Avoidance Systems Make Overhead Lifts Safer?
• How To Make Your Overhead Crane More Efficient
• Steel’s Sprint From the Safety Stone Age
• How Virtual Reality and Augmented Reality Are Revolutionizing Industrial Training

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Overhead Crane Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

Steel mills have come a long way! The "hot, nasty, dirty, and dangerous" mills of yesteryear were all about tonnage. But now it's people over production.

In this episode of Safety Factor, we follow the fiery trail from OSHA to smart sensors. Three mill veterans bare their battle scars from the early days. We're talking about tearing your rotator cuff atop 3,000° furnaces. No tie-offs, no fall protection, no nothin'. Just sweat and steel.

Today it's a new safety culture focused on planning, training, and prevention. VR simulators, automated cranes, and "no-touch" tools help avoid hand crushing and drops. Real-time data guides continuous improvement. And cardinal rules weed out the reckless.

Steel may still run thick in the blood, but now there's pride in safety records too. Far from the Wild West, modern mills blend tradition with technology. Protecting their tribe, sharpening their edge. How are steel mills becoming safer and more modern workplaces?

Join Michael, Jim, and Chris as they temper their decades of expertise. We examine past pitfalls, current challenges, and the high-tech future. How to keep good people safe - and build quality faster than ever.

So heat things up with us! Learn why steel mills are becoming safer, smarter workplaces while staying productive. Learn how the steel industry is evolving to protect its people and retain its proud traditions. In this episode of Safety Factor, experts examine progress in safety procedures, training, equipment, and culture. It's all here in this edition of Safety Factor!

Guests:

• Michael Skipper, General Supervisor of Rail Mill Operations at EVRAZ North America
• Jim Warren, Director of Steel Segment at Mazzella
• Chris Ross, Key Account Manager for Steel Sales at Mazzella

Background Reading:

• What is the No-Touch Electrode Handling System?
• No touch hand tools can help to reduce hand and finger injuries by facilitating safe movement of the load. How to Use No-Touch Hand Tools to Reduce Injuries on Your Job Site
• Are you looking for a more efficient way to rig a crane hook? Elebia evo Automatic Crane Hook: Design, Benefits, & Best Uses
• OSHA Hierarchy of Controls: Reducing Fall Hazards for Working at Height

Related Podcasts:

• How To Make Your Overhead Crane Safer
• How To Make Your Overhead Crane More Efficient
• How Is ITI Incorporating Technology Into Crane Operator Training?
• How To Start An In-House Safety Program

Learn More:

• About EVRAZ North America
• Mazzella Electrode Handling Solutions
• Follow Mazzella Companies on LinkedIn
• Subscribe to The Lifting & Rigging Channel on YouTube
• Subscribe to the Advancing Careers YouTube Channel

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Mazzella's Rigging Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

In this episode of Safety Factor discover how virtual reality (VR) and augmented reality (AR) are revolutionizing industrial training for safety purposes. Join us as we discuss the advancements in industrial training with Adam Franz from Mazzella and Andrew Kauser from ITI (Industrial Training International).

Learn how VR crane simulation enhances operator training by creating a safe environment to learn and practice crane operations, reducing human error-related accidents. Explore how VR and AR are bridging the generation gap, engaging both younger and older workers in immersive learning experiences. Get insights into the realistic and immersive nature of VR simulators, which transport trainees into various industrial scenarios, including heights and challenging environments. Discover how simulation-based training improves muscle memory, prepares individuals for real-world scenarios, and enhances performance. Find out how simulation training is being used to attract new talent and fill the skill gap in industries. Gain valuable information about certifications, tests, and the role of simulators in qualifying operators for real-world equipment operation. Don't miss this eye-opening discussion on the future of industrial training and safety.

Guests:

• Andrew Kauser, Chief Product Officer & SVP - Simulation & Online Learning at ITI (Industrial Training International)
• Adam Franz, Director of National Accounts at Mazzella

Background Reading:

• When does virtual reality make sense for an organization to scale its training program?
• Do you know which of your riggers are competent or qualified? What requirements do you use to make that determination? Could you provide proof that your employees meet those requirements? OSHA Definitions of Competent, Qualified, Designated, & Certified Persons
• Many employers don’t understand who is responsible for providing training for employees who operate overhead crane equipment. Crane Operator Training: Who’s Responsible for Training Your Employees?
• OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?
• If your employees think training means nothing more than free donuts and time away from work, then it won’t be effective. How to Get More Out of Your Rigging Training and Lift Training Courses
• Mazzella and ITI Deepen 30-Year Relationship with a Robust Partnership
• Mazzella Companies’ Adam Franz Wins 2019 Corporate Top Trainer Award
• Ride Along with Al Abel – Day in the Life of a Lifting & Rigging Trainer

Learn More:

• About ITI
• Follow Mazzella Companies on LinkedIn
• Subscribe to The Lifting & Rigging Channel on YouTube
• Subscribe to the Advancing Careers YouTube Channel

Mazzella Companies Career Opportunities

• See Mazzella Companies Careers Opportunities
• Mazzella’s Crane Service Technician Apprenticeship

Contact Mazzella:

• Schedule Remote or In-Person Rigging Training
• Contact Mazzella's Rigging Division Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

In this episode of Safety Factor, we delve into the importance of Global Lifting Awareness Day (#GLAD) and its efforts to combat the labor shortage within the industry. Join our guests, Ross Moloney, CEO of the Lifting Equipment Engineers Association (LEEA), and Mike Close, Mazzella Corporate Marketing & Communications Manager, as we discuss the strategies employed to develop talent, raise awareness, and tackle the growing gap between demand and available skilled workers. Gain valuable insights into how this global event plays a vital role in shaping the future of the lifting industry. Discover how you can actively participate in Global Lifting Awareness Day, contribute to the cause, and become a catalyst for change. Elevate your understanding and join us as we embark on a captivating exploration of the lifting industry's future.

Don't miss out on this opportunity to make a difference and be a part of something bigger. Whether you're a lifting professional, an employer, or simply interested in industry trends, this episode provides a compelling exploration of the labor shortage and the initiatives driving change in the lifting industry.

Guests:

• Ross Moloney,Phd, CEO of the Lifting Equipment Engineers Association (LEEA)
• Mike Close, Corporate Marketing & Communications Manager at Mazzella Companies

Background Reading:

• GLAD 2023 Global Mission Statement
• About LEEA
• Think Lifting: Schools Engagement Project
• How Can Mazzella’s Crane Service Technician Apprenticeship Help Your Career
• Mazzella and ITI Deepen 30-Year Relationship with a Robust Partnership
• Military Transition Scheme

Learn More:

• Global Lifting Awareness Day 2023
• The Lifting Equipment Engineers Association (LEEA)

• GLAD2023 Twitter

• GLAD2023 LinkedIn

• Follow Mazzella Companies on LinkedIn
• Subscribe to the Advancing Careers YouTube Channel
• Cuyahoga Community College Lifting Technologies Program

Mazzella Companies Career Opportunities

• See Mazzella Companies Careers Opportunities
• Mazzella’s Crane Service Technician Apprenticeship

Contact Mazzella:

Schedule Remote or In-Person Rigging Training

Contact Mazzella's Rigging Division

Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

In this episode of "Safety Factor," we discuss how technology is being used to enhance safety in crane lifts. Our guests, Wayne Wille and Denny Davis, Development Managers for Technology Solutions at The Crosby Group, and Tyler Henley, National Account Manager for Specialty Ropes at Mazzella, share their expertise on the latest technological advancements that have been developed to improve safety in crane lifts.

We explore common causes of accidents and injuries when using cranes to lift heavy loads and discuss specific examples of technology that are being used to enhance safety in crane lifts, such as sensors, automation, and advanced software that monitors crane performance and load stability.

Our guests provide insights into how companies and operators can ensure that their cranes are being used safely and in accordance with regulations, as well as best practices for training workers on using this new technology safely. We also cover how the new technology works, how it can be combined, and how companies and individuals can implement safety measures to reduce accidents and injuries.

Join us as we explore the innovative ways in which technology is being used to enhance safety in the lifting and rigging industry and discuss real-world examples of companies and individuals successfully implementing safety measures that have resulted in fewer accidents and injuries. Learn how you can improve your crane lift safety practices with the latest technology solutions.

Guests:

• Wayne Wille, Business Development Manager for Technology Solutions at The Crosby Group.
• Denny Davis, Business Development Manager for Technology Solutions at The Crosby Group
• Tyler Henley, National Account Manager for Specialty Ropes at Mazzella

Background Reading:

• A Brief Mobile Cranes Glossary: Basic Terms You Should Know
• Tower Cranes: Common Terms, Structures, & Systems You Should Know
• What’s the Verton EVEREST SpinPod, & How Does It Make Lifts Safer?
• How Has the Demand for Wind Energy Affected the Lifting and Rigging Industry? What New Lifting & Rigging Trends Can You Expect in Wind Energy?
• Maintaining control of your load during an overhead lift is critical to a safe, successful rigging plan. Considerations for Maintaining Load Control When You Rig Your Next Lift.

Learn More:

• Crosby Straightpoint
• Crosby BlokCam
• Verton
• Crosby Airpes

FREE DOWNLOAD:

• Never Gamble With Your Safety! Lifting & Rigging Best Practices Infographic

Schedule Remote or In-Person Rigging Training

Contact Mazzella's Rigging Division

Legal Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

View Details

The demand for wind energy is growing. The size of turbines is growing. Wind energy is forcing the lifting industry to evolve. So, how will the lifting industry adapt to the increasing size of these turbines? What challenges does the US face as they begin to move their turbines off-shore?

To shed some light on this industry and what the future has in store, we sat down with The Crosby Group’s Director of Business Development for Wind, Ken Milligan. As well as Mazzella's National Account Manager for Specialty Ropes, Tyler Henley, and Specialty Ropes Service Manager, Jason Kuhlman.

Guests:

Ken Milligan, Director of Business Development for Wind at The Crosby Group.

Tyler Henley, National Account Manager for Specialty Ropes at Mazzella

Jason Kuhlman, Specialty Ropes Service Manager at Mazzella

Background Reading:

• A Brief Mobile Cranes Glossary: Basic Terms You Should Know
• What’s the Verton EVEREST SpinPod, & How Does It Make Lifts Safer?
• Maintaining control of your load during an overhead lift is critical to a safe, successful rigging plan. Considerations for Maintaining Load Control When You Rig Your Next Lift.
• How Can You Prepare for a Crane Rope Installation? What Can You Expect from a Mazzella Crane Rope Installation?
• Wire rope is a complex piece of mechanical machinery with a number of different specifications and properties that can affect its performance and service life. What Is Wire Rope? Understanding the Specifications and Construction
• How Much Does an ASME-Compliant Third-Party Crane Rope Inspection Cost? What is the Cost of a Third-Party Crane Rope Inspection?
• What Should I Consider When Thinking of Going With a Third-Party Crane Ropes Installer? Why Should a Third-Party Company Install Your Crane Ropes?
• What is ASME B30.30, and How Does It Apply to Wire Rope Inspection
• Under normal conditions, machines receive periodic inspections, and their overall condition is recorded—including the drums and sheaves. Inspection of Wire Rope Sheaves and Drums

FREE DOWNLOADS

• Lifting & Rigging Best Practices Infographic
• Lifting & Rigging Site Assessment Guide

Schedule Remote or In-Person Rigging Training

Contact Mazzella's Rigging Division

View Details

In 2022, OSHA's most frequently cited violation was the failure to meet General Fall Protection requirements. In fact, four of the top ten citations issued by OSHA were related to fall protection, encompassing citations regarding ladders, scaffolding, and fall protection training. Shockingly, nearly all of the largest OSHA fines handed out in 2022 were penalties for neglecting to comply with fall protection regulations, with one Ohio contractor receiving a hefty fine of over $1 million for fall protection violations.

To shed some light on the underlying psychology behind this trend and discuss ways to avoid these violations, we interviewed Fall Protection experts, Kevin Muldoon from Mazzella, and Dan Montchal from Tractel.

Guests:

Dan Montchal, Regional Sales Manager at Tractel

Kevin Muldoon, Product Manager of Engineered Lifeline Systems and Fall Protection from Mazzella

Background Reading:

• How can I keep my workers safe when they are working at height? OSHA Inspection Series: The Principles of Fall Protection Safety
• Fall Protection for Roofers: Systems, OSHA Regulations, & Best Fits
• Do you have six minutes to invest in a safer future on the job site? The Basics of Fall Protection in Six Minutes
• How Does Fall Protection Differ from Fall Prevention?
• Are you overwhelmed with the terms used in personal fall protection and fall prevention? Fall Protection & Fall Prevention: Terms, Systems, & OSHA Regulations

FREE DOWNLOADS

• Harness Inspection Checklist
• SRL / Lanyard Inspection Checklist
• Hierarchy of Fall Protection [Infographic]
• Top 10 Safety Tips for Working at Height Infographic
• Job Safety Analysis & Working at Height Risk Assessment Bundle
• Top 5 Fall Protection Hazards On The Jobsite Infographic

Schedule Remote or In-Person Rigging Training

Contact Mazzella's Fall Protection Division

View Details

Today we are talking about the legal ramifications of building your own lifting devices and rigging equipment and why ASME has specific standards in place for the creation of a below-the-hook device.

We are joined by a few lifting experts from Caldwell Lifting Solutions, one of the leading manufacturers of below the hook lifting solutions, as well as Mazzella's Kevin Brewer, Below-the-Hook Sales Specialist, to discuss why the devices you are currently using, if not made to very specific ASME standards, may put you at legal risk and open to OSHA fines.

Guests:

• Jay Schroeder, Regional Sales Manager at The Caldwell Group, Inc.
• Dan Mongan, Senior Sales Engineer at The Caldwell Group, Inc.
• Dale Kelly, Engineering Manager at The Caldwell Group, Inc.
• Kevin Brewer, BTH Sales Specialist at Mazzella Companies

Background Reading:

• Why Are Engineered Below-the-Hook Devices Better than Homemade Devices?
• ASME B30.20 and ASME BTH-1 are the two most important standards when it comes to the design and markings of a below-the-hook lifting device. What Makes My Below-the-Hook Lifting Device OSHA Compliant?
• ASME B30.20-2021: Updates & Revisions to the Below-The-Hook Standard
• Special consideration must be given to the environment it will be used in, the type of load it will be lifting, and how often it will be used. 7 Things You Should Know Before Buying a Below-the-Hook Lifting Device
• A review of the applicable ASME B30.20 and ASME BTH-1 standards and acceptable markings for older below-the-hook lifting devices. Identification & Markings for Older Below-the-Hook Lifting Devices

FREE Download

• Download your FREE checklist and Design Sheet Things to Consider When Designing a Custom Lifting Device Checklist & Design Sheet

Learn More

• Listen to more podcasts on BTH devices: What You Should Know Before Buying a Below-the-Hook Lifting Device
• Visit the Mazzella Learning Center for more information, videos, articles, downloads, and podcasts!

_____________________________________________

Contact Mazzella

Schedule Remote or In-Person Rigging Training

Contact Mazzella's Rigging Division

_____________________________________________

Subscribe Where You Listen

Subscribe and Listen on Apple Podcasts

Subscribe on Spotify

Subscribe on Google Podcasts

Subscribe on iHeart Radio

Listen on Audible

View Details

Welcome back to Safety Factor. In this episode we are talking about overhead cranes and how smart non-contact measurement solutions can make your overhead crane more efficient.

Today, we are joined again by Steven Lubeck, President of Laser-View Technologies, a provider of non-contact measurement sensors and systems for industry and Mazzella Companies' Mark Shubel, Director of Business and Training Development for Crane Service to discuss how Smart Non-Contact Measurement Solutions can help make overhead cranes more efficient.

Guests:

• Steven Lubeck, President of Laser-View Technologies
• Mark Shubel, Director of Business & Training Development, Crane Service and Engineered Products at Mazzella Companies

Background Reading:

• With modern technologies becoming more readily available and more affordable, the safety features available for overhead crane systems have never been better. Overhead Crane Safety Systems: Modern Features and Technologies.
• Die and mold handling can be complicated and dangerous. Learn how to assess your lifting practices and the equipment your team is using to handle dies and molds. Lifting and Rigging Solutions for Die Handling and Automotive Stamping
• The amount of engineering and fabrication to meet your specifications can determine whether a modular system or an engineered or process crane system is right for you. Overhead Cranes: Modular Cranes vs. Engineered Process Cranes.
• Understanding the process and expectations of buying an overhead crane—from the first contact with an overhead crane manufacturer, through the consultation and quote processes, and all the way up to installation. Purchasing an Overhead Crane Process: From Consultation to Installation.

FREE Download

• Download our free Overhead Cranes E-Book: Overhead Cranes From Top To Bottom

Learn More

• Enroll in Cranes 101 to get a better understanding of overhead crane systems.
• Visit the Mazzella Learning Center for more information, videos, articles, downloads, and podcasts!

_____________________________________________

Contact Mazzella

Schedule Remote or In-Person Rigging Training

Contact Mazzella's Overhead Crane Division

_____________________________________________

Subscribe Where You Listen

• Subscribe and Listen on Apple Podcasts
• Subscribe and Listen on Spotify
• Subscribe and Listen on Google Podcasts
• Subscribe and Listen on iHeart Radio

View Details

Welcome back to Safety Factor. In this episode we are talking about in-house safety programs. How you can you start one, how can you improve yours, and how can you be a better safety coordinator.

Today, we're joined by Mazzella Companies' Kevin Paul, Director of Safety, and Alana Cohen, Safety Coordinator, to discuss how they got their start in the world of safety, how they helped develop Mazzella's safety program, and what wisdom they've learned along the way.

Guests:

Kevin Paul, Director of Safety, QSTR Team at Mazzella Companies

Alana Cohen, Safety Coordinator at Mazzella Companies

Background Reading:

• Be an active participant in workplace safety and identify job safety hazards before they cause an accident or injury. How to Identify Workplace Hazards by Performing a Job Safety Analysis (JSA)
• OSHA Inspection Series: What You Can Expect From an OSHA Inspection?
• Five of the most common observations from the field that could prevent you from reaching 100% compliance with OSHA and ASME requirements. 5 Reasons Your Lifting & Rigging Program Isn’t OSHA/ASME Compliant
• How Can Lifting and Rigging Training Help My Company Maintain OSHA Compliance? OSHA Inspection Series: How Can Lifting & Rigging Training Help with OSHA Compliance?

Download your FREE assets for your safety program!

• Rigging Gear Inspection Field Reference Poster
• OSHA Personnel Designations Guide Poster
• Job Safety Analysis & Working at Height Risk Assessment Bundle
• Top 5 Fall Protection Hazards On The Jobsite Infographic
• Visit the Mazzella Learning Center for more information, videos, articles, downloads, and podcasts!

Schedule Remote or In-Person Rigging Training Here

Check us out on YouTube at the Lifting & Rigging Channel.

View Details

Welcome to the first official episode of safety factor. This is a podcast where we are going to be talking a lot about how you can stay safe while you are doing your job, or how you can keep your employees safe while they do their jobs.

In this first episode we are talking about overhead cranes and how to create safer work zones with smart non-contact measurement solutions.

Today, Steven Lubeck, President of Laser-View Technologies, a provider of non-contact measurement sensors and systems for industry, joins Mazzella Companies' Mark Shubel, Director of Business and Training Development for Crane Service, and Kenny Wright Vice President of Process Cranes and Modernizations to discuss how Smart Non-Contact Measurement Solutions can help create safer work zones when working with overhead cranes.

Guests:

• Steven Lubeck, President of Laser-View Technologies
• Mark Shubel, Director of Business & Training Development, Crane Service and Engineered Products at Mazzella Companies
• Kenny Wright, Vice President of Process Cranes and Modernizations at Mazzella

Background Reading:

• With modern technologies becoming more readily available and more affordable, the safety features available for overhead crane systems have never been better. Overhead Crane Safety Systems: Modern Features and Technologies
• The amount of engineering and fabrication to meet your specifications can determine whether a modular system or an engineered or process crane system is right for you. Overhead Cranes: Modular Cranes vs. Engineered Process Cranes
• Understanding the process and expectations of buying an overhead crane—from the first contact with an overhead crane manufacturer, through the consultation and quote processes, and all the way up to installation. Purchasing an Overhead Crane Process: From Consultation to Installation
• Enroll in Cranes 101 to get a better understanding of overhead crane systems.

Visit the Mazzella Learning Center for more information, videos, articles, downloads, and podcasts!

Check us out on YouTube at the Lifting & Rigging Channel.